background image

CAUTION

Gas

Gas

Gas

Oil

Oil

Oil

Spr

ay

Bef
o

re
Using

3

Do not allow the unit to intake
flammable gases.
Do not use where there is
accumulation of such flammable
gases (factories, hair salons, etc.).

Explosion and/or fire

may

occur as a result.

Do not install in a location
such as a bathroom where the
unit may get wet, and avoid
places with high humidity.

Electrical shock and/or
malfunction

may occur as a result.

If the unit gets wet for some reason,
stop operation, remove the power
plug and contact your dealer of
purchase or Mitsubishi Electric &
Electronics USA, Inc..

Do not use in a location
where there is lampsmoke,
such as from machine oil,
etc.

The unit may crack, resulting in

electrical shock and/or
malfunction

.

Do not insert fingers or foreign
objects into the intake grill, the
exhaust air port, or any small
openings of the unit interior.

Electrical shock, malfunction
and/or injury

may occur as a result.

Do not wipe with benzene or
paint thinner, and do not spray
insecticides or deodorizers,
etc., onto the unit.

Electrical shock, fire and/or
cracking

may occur as a result.

Do not remove the HEPA
filter with the unit laying on
its back.

Dust may enter inside the unit,
and 

fire and/or electrical

shock

may occur as a result.

Do not use damaged filters, or
operate the unit without a filter.
Contact your dealer or Mitsubishi
Electric for a replacement.

Fire and/or electrical shock

may occur as a result.

Do not touch the electric
poles of the Plasma unit.

Injury

may occur as a result.

Ventilate periodically when
using the unit with a
heating appliance, etc. 

Insufficient ventilation may
cause 

CO intoxication

.

Do not use rechargeable batteries.

Make sure that the 

and 

are correctly aligned.

When replacing, always replace batteries at the same time using
the same type.

If the electrolyte from the alkaline batteries comes into contact with
skin, wash thoroughly with water. If the electrolyte accidentally
enters your eye, flush with water and seek immediate medical
attention.

Remove the power plug
when not using for an
extended period of time.

Insulation may deteriorate,
causing 

short circuit, fire and/or

electrical shock

as a result.

Use the batteries correctly by following the items below.

Injury and/or malfunction

may occur if mishandled.

Saf

ety precautions

Содержание MA-EF303HS-U

















Отзывы: