Mitsubishi Electric M800W Series, Руководство по подключению и настройке

Страница: 534 / 702

M800W/M80W Series Connection and Setup Manual
25 Setting the Position Detection System
495 IB-1501268-K
25.1.5 Dog-type
The zero point initial setting is now complete. After initializing all axes, turn the power OFF and ON.
(Note 1) If the dog-type reference position return is interrupted by resetting, the previous state ("Complete" or
"Illegality") will display in the [State] column.
(Note 2) With dog-type reference position return, reference position return can be executed again even if the [State] is
"Complete".
(1) Preparations
Set the parameters on the Abs pos
param screen. #2049 type (absolute position detection method): 3 (dog-type)
The parameters for the approach speed and grid mask amount etc.
need to be adjusted.
(2) Turn the power OFF and ON.
(Only when "#2049 type" is specified again.)
The following are the operations on the absolute position setting screen. (Select [Mainte] - [To Abs pos])
(3) Select an axis to set the absolute
position.
There are two methods to select an
axis.
- Select the menu [Axis select], enter
the axis name in the input area then
press [INPUT]. (For the axis name,
input the name set to the parameter
"#1022 axname2" (2nd axis name).)
- Press the menu [Prev axis] and [Next
axis] to switch the axis.
(4) Execute the manual or automatic dog-
type zero point return. State: [Zero-P. Rel.]
Machine position: Current machine position
(5) The axis arrives at the zero point. State: [Complete]
Machine position: 0.000
Selected axis