background image

English-24

SCREEN SAVER

COLOR SYSTEM

*:INPUT VIDEO  only

SIDE BORDER

COLOR

CONFIGURATION

RESET

FACTORY RESET

Select "SCREEN SAVER" functions to reduce 
the risk of the "image persistence".
GAMMA: The display gamma is changed and 
fixed when selected "ON".
COOLING FAN: The built in cooling fan is 
always on when set "ON".
BRIGHTNESS: The brightness is decreased 
when selected "ON".
MOTION: Image is slightly expanded and 
moves 4 directions (UP, DOWN, RIGHT, 
LEFT) periodically (Need setting the time for 
movement).
Movement area is approxi/- 10mm 
from original position; Please locate the 
important information such as text within 90% 
area of screen image.
See note (1) for this functions.
PIP and STILL will be disabled when 
"MOTION" is active.

Selecting the Color System depends on your 
input video format.
AUTO: NTSC, PAL, SECAM, PAL60 or 4.43 
NTSC is automatically selected.
NTSC: Specific selection of NTSC.
PAL: Specific selection of PAL.
SECAM: Specific selection of SECAM.
PAL-60: Specific selection of PAL60.
4.43NTSC: Specific selection of 4.43 NTSC.

Selecting the side black bar color white when 
4:3 image displayed, black to white.

Selecting the CONFIGURATION RESET allows 
you to reset all configuration settings.
Select "Yes" and press "SET" button to restore 
the factory preset data.
Press "EXIT" button to cancel and return the 
previous menu.

Selecting "YES" allows you to reset PICTURE, 
SCREEN, AUDIO, CONFIGURATION1,2 and 
ADVANCED OPTION will be back to factory 
settings (except LANGUAGE, DATE & TIME 
and SCHEDULE).  Select "YES" and press 
"SET" button to restore the factory preset 
data.  Press "EXIT" button to cancel and 
return the previous menu.

Содержание LDT32IV






































Отзывы: