EN-10
Setting up your projector
Setting up the screen
Install the screen perpendicularly to the projector. If the screen can not be installed in such a way, adjust the
projection angle of the projector. (See page 12.)
•
Install the screen and projector so that the projector’s lens is placed at the same height and horizontal position of
the screen center.
•
Do not install the screen where it is exposed to direct sunlight or lighting. Light directly reflecting on the screen
makes the projected images washed-out and hard to view.
Aspect Ratio
You can keep the image display area within the screen by setting Aspect Ratio in the Screen menu according to the aspect
ratio of the actual screen. Select Full screen when the aspect ratio of the screen is Full screen or Standard.
When setting Aspect Ratio to Full screen:
•
4:3 size movies are projected in the full screen.
•
Set Aspect Ratio in the Screen menu to Full Screen when displaying Vista-size images. In this case, they are squeezed
horizontally.
•
When Aspect Ratio in the Screen menu is set to Anamophic 1 and 480i/p, 576i/p, 720p, or 1080i/p signal is input, the part
for displaying subtitles is not projected. To display subtitles, reset Aspect Ratio to Full screen and adjust the image position
using Horizontal Position and Vertical Position in the Screen menu.
Screen size and projection distance
Refer to the following tables to determine the screen size and projection distance.
•
The figures in the tables are approximate and may be slightly different from the actual measurements.
•
The lens shift height and width show distances from factory default position.
When the aspect ratio of the screen is Full Screen
Screen (16:9)
Distance from Screen
Lens movable range
Diagonal size
Height (SH)
Width (SW) Shortest (Wide) Longest (Tele)
H1
W1
inch
cm
inch
cm
inch
cm
inch
m
inch
m
inch
cm
inch
cm
50
127
25
62
44
111
66
1.7
122
3.1
25
62
20
50
60
152
29
75
52
133
80
2.0
147
3.7
29
75
24
60
70
178
34
87
61
155
94
2.4
172
4.4
34
87
27
70
80
203
39
100
70
177
108
2.7
197
5.0
39
100
31
80
90
229
44
112
78
199
122
3.1
222
5.6
44
112
35
90
100
254
49
125
87
221
135
3.4
246
6.3
49
125
39
100
110
279
54
137
96
244
149
3.8
271
6.9
54
137
43
110
120
305
59
149
105
266
163
4.1
296
7.5
59
149
47
120
150
381
74
187
131
332
205
5.2
371
9.4
74
187
59
149
200
508
98
249
174
443
274
7.0
496
12.6
98
249
78
199
•
Projection distance changes according to the setting of Aspect Ratio in the Screen menu. The table above is in the case of “Full Screen.”
•
Depending on the installation conditions, warm air that is emitted from the exhaust vents may flow into the intake vent,
causing the projector image stop.
Screen height (SH)
L
50%
50%
H1
H1
Screen
Down shift
Up shift
50%
50%
Screen width (SW)
Right shift
W1
W1
Left shift
