25
5-2-6 Setting the destination to which temperature/humid trend data mail is sent
To send temperature/humid trend data by mail once a day (when the date changes), make the mail sending
settings. The trend data is sent as an attachment CSV file.
The following format will be applied to the attachment file attached to the mail that is sent when the date
changes.
(1) Select the [Trend Data] in the Type of E-Mail
pulldown, and enter the Mail Subject and the E-Mail
Address.
Note: The following characters cannot be used in the mail title:
< > & “ ‘
(2) Click the [E-Mail Settings] to set the mail server
information.
Note: The setting details are the same as those mentioned in
the chapter 5-1-1 and 5-1-2. Refer to those chapters.
121
23/01/2007
Address 50-1
Time,Temperature(deg C)
00:00,20.3
00:05,20.1
00:10,19.8
00:15,19.3
:
23:50,18.8
23:55,18.5
Item
Format
File Type
121: Temperature data
122: Humidity data
Date
dd/MM/yyyy
Note: The date format set in section 4-2-5 will be
applied.
Trend target
M-NET address of AI cont sensor No.
Measured item
“Time,Temperature” or “Time,Humidity”
Data
Time + Measurement data
Note: The data interval, separator character, decimal
point character that are set in section 5-3-4 will
be applied.
