Mitsubishi Electric FX3U-ENET-ADP, Руководство пользователя

Страница: 42 / 162

6 Introduction of Functions
36
FX
3U
-ENET-ADP User's Manual
6.2 Details of functions
6.2.6 Parameter setting function
This function sets parameters of the Ethernet adapter from GX Works2 via the PLC main unit.
For details of operation setting, refer to Section 6.6. For details of open setting, refer to Section 6.11.
For operation of GX Works2, refer to Section 8.1 and Section 8.2.
List of parameter setting function settings
6.2.7 The diagnostics function from MELSOFT
This function diagnoses the Ethernet adapter from GX Works2 via the PLC main unit. (Ethernet Diagnostics)
For operation of GX Works2, refer to Section 8.6.
The diagnostics function list from MELSOFT
*1. Log record setting is required in advance. For details of setting, refer to Section 8.4.
Caution
The diagnostics function is available even if the PLC main unit is set to batteryless mode, but the diagnostic
result is cleared when the power is turned OFF once and ON again.
Setting
Channel
Operation setting
IP address
Subnet mask pattern
Default router IP address
Communication data code
Direct connection (simple connection)
Find CPU function
Open setting
Protocol
Open system
Host station port No.
Destination IP Address
Destination Port No.
function Description
Parameter status IP address, Ethernet address, etc. are displayed.
Error history
*1
Connection No., error code, port number, date, time, etc. are displayed.
Status of each connection
Host station port No., Destination IP Address, Destination Port No., newest error code, etc. are
displayed.
Access history
*1
The date, time, connection No., Destination IP Address, etc. are displayed.
Status of each protocol TCP packet, UDP packet, etc. are displayed.
Connection status Full-duplex/Half-duplex, connection condition, and 10BASE-T/100BASE-TX are displayed.
Time setting status
*1
The latest time setting time and the Acknowledge duration are displayed.
PING test
This test checks the presence of Ethernet module in the Ethernet line in which initialization is
completed or the presence of specified IP address.