Mitsubishi Electric FR-E800, Инструкция по эксплуатации

Страница: 54 / 484

53
3. Parameters
3.2 Parameter list (by parameter number)
1
2
3
4
5
6
7
8
9
10
3.2
Parameter list (by parameter number)
For simple variable-speed operation of the inverter, the initial values of the parameters may be used as they are. Set the
necessary parameters to meet the load and operational specifications. Parameter's setting, change and check can be made
on the operation panel.
NOTE
• indicates simple mode parameters. Use Pr.160 User group read selection to indicate the simple mode parameters
only (initial setting is to indicate the extended mode parameters).
• The changing of the parameter settings may be restricted in some operating statuses. Use Pr.77 Parameter write selection
to change the setting of the restriction.
• Refer to page 465 for instruction codes for communication and availability of parameter copy, Parameter clear, and all clear.
Notation
[E800]: Available for the standard model.
[E800-1]: Available for the FM type inverter (standard model).
[E800-4]: Available for the AM (50 Hz) type inverter (standard model).
[E800-5]: Available for the AM (60 Hz) type inverter (standard model).
[E800-(SC)E]: Available for the Ethernet model and the safety communication model.
[E800-SCE]: Available for the safety communication model.
[E800-(SC)EPA]: Available for the Protocol group A (Ethernet model / safety communication model).
[E800-(SC)EPB]: Available for the Protocol group B (Ethernet model / safety communication model).
[200/400 V class]: Available for the 200/400 V class inverters.
[575 V class]: Available for the 575 V class inverters.
[3-phase]: Available for the three-phase power input model.
 Pr.0 to Pr.99
Simple Simple Simple
Function Pr.
Pr.
group
Name Setting range
Minimum
setting
increments
Initial
value
*1
Refer
to page
Customer
setting
Gr.1 Gr.2
Bas
ic fun
ctio
n
0 G000 Torque boost 0% to 30% 0.1%
6%
*2
426
5%
*2
4%
*2
3%
*2
2%
*2
1 H400 Maximum frequency 0 to 120 Hz 0.01 Hz 120 Hz 253
2 H401 Minimum frequency 0 to 120 Hz 0.01 Hz 0 Hz 253
3 G001
Base frequency
0 to 590 Hz 0.01 Hz 60 Hz 50 Hz 428
4 D301
Multi-speed setting (high
speed)
0 to 590 Hz 0.01 Hz 60 Hz 50 Hz 234
5 D302
Multi-speed setting (middle
speed)
0 to 590 Hz 0.01 Hz 30 Hz 234
6 D303
Multi-speed setting (low
speed)
0 to 590 Hz 0.01 Hz 10 Hz 234
7 F010 Acceleration time 0 to 3600 s 0.1 s
5 s
*3
196
10 s
8 F011
Deceleration time
0 to 3600 s 0.1 s
5 s
*3
196
10 s
9
H000
C103
Electronic thermal O/L
relay
Rated motor current
0 to 500 A 0.01 A
Inverter rated
current
238 ,
345 ,
355
Simple Simple Simple
Simple Simple Simple
Simple Simple Simple
Simple Simple Simple
Simple Simple Simple
Simple Simple Simple
Simple Simple Simple
Simple Simple Simple
Simple Simple Simple
Simple Simple Simple
Simple Simple Simple