10
INSTALLATION AND WIRING
(2) Loosen the terminal screw and insert the cable into the terminal.
REMARKS
• Information on blade terminals
Commercially available product examples (as of Jan. 2010)
Insert wires to a blade terminal, and check that the wires come out for about 0 to 0.5 mm from a sleeve.
Check the condition of the blade terminal after crimping. Do not use a blade terminal of which the crimping is
inappropriate, or the face is damaged.
Screw Size
Tightening Torque
Cable Size
Screwdriver
M2
0.22N
⋅
m to 0.25N
⋅
m
0.3mm
2
to 0.75mm
2
Small
flat-blade screwdriver
(Tip thickness: 0.4mm/tip width: 2.5mm )
CAUTION
• Undertightening can cause cable disconnection or malfunction. Overtightening can cause a short circuit or
malfunction due to damage to the screw or unit.
Blade terminal crimping tool: CRIMPFOX 6T-F/6 (Phoenix Contact Co., Ltd.)
Terminal
Screw Size
Wire Size
(mm
2
)
Blade Terminal Model
Maker
With insulation sleeve
Without insulation sleeve
M2
0.3, 0.5
AI 0,5-6WH
A 0,5-6
Phoenix Contact
Co.,Ltd.
Unstranded
wires
Damaged
Wires are not inserted
into the shell
Crumpled tip
Sleeve
Shell
W
ire
0 to 0.5mm
