530
123
65
11
6
677
10
Installation
4
EN
Back plate
Wall
Screw mounting holes
Notch
Mounting procedure
1. Install the included back plate accessory.
* When installing the back plate, use locally-supplied screws and compatible fixing plugs.
● Figure 4.1.6 shows the relative positions between the unit and the wall secured
back plate.
Referring to the <Figure 4.1.3> Service access, install the back plate.
● Ensure that the notch is positioned at the TOP of the back plate.
The back plate is provided with screw mounting holes that are round or oval.
To prevent the unit from falling off the wall, choose the appropriate number
of holes or hole positions and horizontally secure the back plate to the
appropriate wall location.
Back plate
<Accessory>
Unit
Hook
(on the back
of casing)
Back plate
<Front view of unit>
Hook
Unit
Back plate
2. Insert the hook on the back of the hydrobox behind the notch of the back plate.
*The lifting up of the hydrobox is facilitated by first tilting the unit forward using the included packaging cushioning.
Note: Hold the MAIN BODY of the hydrobox when carrying or mounting the hydrobox to a wall.
Holding and supporting the unit by the manometer, water pipe, or refrigerant pipe may result in breakdown of the components and impact on unit’s conditions of warranty.
Packaging cushion
Unit
Wooden packaging base
Tilting the unit.
<Front view>
<Side view>
Wall
Plugs
Back plate (horizontal)
Screws
Screwdriver
<Figure 4.1.4>
<Figure 4.1.5>
<Figure 4.1.6>
<Figure 4.1.7>
<Figure 4.1.8>
Centre line
Removing the wooden
packaging base.
<Process 1>
<Process 2>
<Unit: mm>
