- 6 -
・
Measuring the transmission loss value
Measure the actual transmission loss and verify that it does not exceed the calculated value.
<PASS/FAIL judgment criterion>
The measured Transmission loss value must not
exceed the calculated value.
Even if the loss value is 7 dB or less, the connection distance between stations must not exceed 15 km.
◆
Exterior Specifications
◆
Warranty Information
Users are requested to read the following warranty information with care.
Charge-Free Warranty Period and Scope
In the event of a product failure or flaw (hereafter referred to together as "failure") which occurs
during the charge-free warranty period, and which is the responsibility of Mitsubishi, the product
shall be repaired or replaced without charge by way of the outlet where it was purchased, or through
the services of a Mitsubishi regional/branch office. However, in cases where a service person must
be dispatched to a remote area to perform repairs, the customer shall pay the dispatching cost.
■
Charge-Free Warranty Period
The charge-free warranty period shall extend for one year from either the date of purchase or delivery (to
specified location). However, because a distribution period of up to six months is possible after the product
has been shipped, the charge-free warranty period shall extend for no longer than 18 months from the
manufacture date. Moreover, the charge-free warranty period for repaired items shall not exceed the
original warranty period (warranty period which applied prior to the repair).
■
Charge-Free Warranty Scope
(1) The product's charge-free warranty applies only to cases in which the product has been used in the
manner and in the environment prescribed in the operation manual, with all the conditions and
cautionary items indicated on the product's caution labels having been observed.
(2) The following cases shall be considered as outside the scope of the charge-free warranty, even
if they occur during the warranty period.
[mm]
Figure 6.1 External dimensions
<Unit + mounting plates>
