Mitsubishi Electric CX series, Руководство пользователя

Страница: 69 / 101

B I O S S e t u p & P O S T
OWNER’S HANDBOOK 7/3
Starting Setup
To start the Setup utility:
1. Turn on or restart your computer.
2. Press the <F2> key when you see the message
Press <F2> key
if you want to run SETUP
.
3. If you have previously defined a Supervisor password, you are
prompted for it before BIOS Setup starts.
If BIOS Setup starts on its own
BIOS Setup might start on its own for three reasons:
The power-on self-test (POST) detects a configuration error or
fault. This may be signalled by one or more POST error
messages. If a persistent fault is indicated, make a note of any
error messages and the current configuration settings before
calling an authorised maintainer.
The CMOS battery may be running down. This may cause
spurious POST error messages. If this happens every time you
turn on the computer, you may have to change the battery.
The computer’s configuration may have changed, for example
by the addition of more system memory or an expansion card.
In this case you may have to define the new configuration.