Mitsubishi Electric CX series, Руководство пользователя

Страница: 36 / 101

E x p a n s i o n c a r d s
OWNER’S HANDBOOK 4/5
Installing the card
Read all these instructions through before attempting to install any
expansion card.
Warning
Never carry out any work inside the computer with AC power
applied. Always shut down the computer and unplug all power
cords before removing the top cover.
The only tool required is a small cross-head screwdriver.
1. Observe the precautions detailed in the ‘Safety and Regulatory
notices’ at the front of this handbook.
2. Turn off and disconnect all peripheral devices connected to the
computer. Then turn off the computer and remove the power
cord.
3. Decide in which of the available slots you wish to install the
card. In general it is easiest, where possible, to start with the
lowest slot and work upwards.
4
3
2
1
1 Retaining screws 3 Shared PCI/ISA card slot
2 Slot covers 4 PCI card slots