M o t h e r b o a r d
OWNER’S HANDBOOK 5/15
How to install memory
You can install from 8 MB to 384 MB of memory in the
motherboard DIMM sockets. The board has DIMM sockets
arranged as banks 0, 1, and 2. The motherboard supports the
following memory features:
168-pin DIMMs with gold-plated contacts
66 or 100 MHz SDRAM
Non-ECC (64-bit) and ECC (72-bit) memory
3.3 V memory only
Single- or double-sided DIMMs in the following sizes:
DIMM Size
Non-ECC Configuration
ECC Configuration
8 MB
1 Mbit x 64
1 Mbit x 72
16 MB
2 Mbit x 64
2 Mbit x 72
32 MB
4 Mbit x 64
4 Mbit x 72
64 MB
8 Mbit x 64
8 Mbit x 72
128 MB
16 Mbit x 64
16 Mbit x 72
When adding memory, follow these guidelines:
You can install DIMMs in any of the three banks.
You can use different sizes of DIMMs in different banks.
The BIOS detects the size and type of installed memory.
Notes
For ECC operation to be available, all installed memory must be
ECC and you must enable the ECC Configuration feature in the
Setup program.
If the processor uses the 100MHz bus, (i.e. 350MHz or above), the
DIMMs should conform to the PC100 specification or system
performance could be affected.
Содержание CX series
Страница 1: ...COMPACT CX SERIES Owner s Handbook ...
Страница 2: ...CX SERIES OWNER S HANDBOOK DESKTOP KL EDITION ...
