background image

7

OTHERS

PRECAUTIONS

FEA
TURES

PREP

ARA

TION

TROUBLE-

SHOOTING

CONTENTS

FEATURES AND FUNCTIONS

FRONT PANEL

  PAPER STRIP BIN

Holds the paper strips generated by margin cut. Empty 

the bin frequently to prevent jamming the strips at the 

print outlet.

NOTE

Remove the bin before opening the door. If the door 

is opened with this bin attached, the printer or this 

bin may be damaged. Do not remove the bin during 

printing. It may cause a malfunction.

  CONNECTOR COVER

Do not open the cover during normal use.

  ALARM INDICATOR ( )

This indicator illuminates or blinks when a paper jam 

occurs or the door is open. 

See page 17.

  PAPER RIBBON INDICATOR (

)

When an error concerning the ink ribbon or print paper 

occurs, this indicator illuminates or blinks. 

See page 

17.

1

5

3

4

2

6

7

8

  POWER INDICATOR ( )

When the power is turned on, the indicator illuminates. 

It normally illuminates green, however, blinks or 

illuminates orange depending on the printer status. 

See 

page 17.

  PRINT OUTLET

The printed paper comes out here.

  OPEN BUTTON ( )

Press to release the printing unit out.

  PRINTING UNIT

Open to load print paper or ink ribbon. Press the   

OPEN button to release the printing unit. 

  DOOR

Open the door to mount print paper.

8

9

OPENING THE DOOR

Pull out the printing unit by pressing the OPEN button 

and then pull the knob to open the door.

Printing unit

Door

Knob

Содержание CP-D80DW




























Отзывы: