6
GB
Connect the Connection Kit to the liquid pipe and install it inside the ceiling or on a wall (Do not install in an outdoor location. It may
cause a breakdown). Make sure to install the access door on the ceiling.
Installation location
• The installation patterns below are available. Select the installation pattern according to the preferred installation method. The
distance between indoor unit and Connection Kit is within 15 m. (Pipe:15 m, Cable:2.5 m)
• Install the connection kit at a height of 2.5 m or above from the floor, where it is not easily accessible for the users.
Installation pattern A (Using suspension bolt ; recommended pattern)
Set the Connection Kit mounting plate as shown below.
The mounting plate can also be fixed to suspension bolts before it is fixed to the Connection Kit.
Installation pattern B (Installing the unit on a wall.)
Set the Connection Kit mounting plate as shown below.
Mounting plate
Install the two screws (5 × 10)
Wall
Ceiling
Suspension bolt M10
182
SERVICE SPACE
MIN.500
MIN.100
MIN.200
181
MIN.30
Suspension bolt pitch
240
Mounting plate
Install the two screws (5 × 10)
Wall
Wall
Ceiling
4-Oval holes
Anchor nuts
(procure locally)
Oval hole dimension
Install the four screws (4×50 procure
locally) in oval holes.
(R)
10
5
MIN.50
11
0
ANCHOR NUT
PITCH
62
ANCHOR NUT PITCH
250
SERVICE SPACE
MIN.500
MIN.100
MIN.200
181
MIN.30
(Unit: mm)
(Unit: mm)
02_WT06728X03-body.fm 6 ページ 2013年12月25日 水曜日 午後1時29分