- 11 -
3-3. Installation
• Leave enough space around the unit to allow for an installation/uninstallation of the cover.
• Screw down the cover with M4 screws as shown in the figure below.
Be sure to fix the four corners to prevent it from falling.
• Install on the control panel with an effective depth of at least 105mm (4-
3
/
16
in).
20(
13
/
16
)
50(2)
20(
13
/
16
)
20(
13
/
16
)
* Refer to section
for the product dimensions and weight.
1
Specifications
Unit: mm (in)
Properly install the unit on a stable, load-bearing surface.
Unit installed on an unstable surface may fall and cause injury.
To reduce the risk of wire shorting, fire, electric shock,
and malfunction, do not install the unit in a condensing
environment, and keep the unit out of water and other
sources of water.
