Mitsubishi Electric BAC-HD150, Руководство по установке

Страница: 14 / 16

- 14 -
4-4. Connecting the LAN cable
• Make sure that the LAN cable is long enough to reach the LAN1 connector on the BAC-HD150. Leave the LAN cable
disconnected until all the initial settings for the BAC-HD150 (IP address setting etc.) have been completed.
• Connect the BAC-HD150 (LAN1) and the building management system via a HUB.
• The maximum distance between the HUB and BAC-HD150 is 100 m (328 ft).
1. Turning on the power
Disconnect the LAN cable for connection to the BACnet before turning the power on for the first time.
There is a possibility that the IP address of the unit is already used by another device that is connected to the BACnet.
2. Initial settings
Make the initial setting using the Setting Tool after turning on the power to the BAC-HD150.
Some of the items that require initial settings include BAC-HD150 address and air conditioning system related items.
• IP address of BAC-HD150 (The factory setting for LAN1 is "192.168.1.254.")
• M-NET address of BAC-HD150 (The factory setting is "0.")
• Group configuration for the air conditioning system
Refer to the BAC-HD150 Instructions Manual and the Setting Tool Instructions Manual for detailed instructions for how to make
the initial settings.
Refer to the installation manuals that came with the air conditioning units for how to perform a test run.
Perform a test run for the Mitsubishi Electric air conditioning system and confirm proper operation before connecting to the
building management system and performing a test run. (Refer to the BAC-HD150 Instructions Manual for details.)
CAUTION • Install the LAN cable before installing the unit, and route the cable in the same way as the M-NET transmission
lines.
• Connect the BAC-HD150 to a private network. Use a security device such as a VPN router when connecting to
the Internet. (Without a proper security measure in place, the air conditioning system is vulnerable to access
from unauthorized users.)
5 Making the initial settings
Note
Refer to the BAC-HD150 Instructions Manual and the Setting Tool Instructions Manual for how to make the initial
settings for the BAC-HD150.
6 Test run
Note Refer to the BAC-HD150 Instructions Manual and the installation manuals that came with the air conditioning units
for how to perform a test run for the BAC-HD150.
LAN1 LAN2
LAN1 LAN2 (for future use)