Chapter 4
Chapter 6
Chapter 4
Peripheral items
Appendix A
Appendix C
Pr
eface
Chapter 4
LS PRO HARDWARE TECHNICAL REFERENCE 4/23
Default disable (F5h)
The keyboard performs the same functions as “Set default” except that further
scanning and transmission is disabled.
Set default (F6h)
The keyboard resets, clears its buffers, and responds with an ACK. If it was previously
enabled it then resumes normal scanning/transmission.
Set all keys (F7h, F8h, F9h and FAh)
These commands are only valid when the keyboard is set to “code set three”. The
different code sets are described elsewhere in this section. The commands set all of
the keys to be the type specified: typematic (F7h), make/break (F8h), make only (F9h)
and typematic/make/break (FAh).
Set key type (FBh, FCh and FDh)
These commands are only valid when the keyboard is set to “code set three”. The
different code sets are described elsewhere in this section. The commands set
individual keys to be the type specified: typematic (FBh), make/break (FCh) and make
only (FDh). The command is first sent, the keyboard acknowledges the command and
waits for the key scan code to be sent. One or more key codes can be sent. The
keyboard then waits for an ENABLE (F4h) before resuming scanning.
Resend (FEh)
The keyboard resends the last code sent to the system unit.
Reset (FFh)
The keyboard responds with an ACK, performs a set of internal diagnostics, clears its
key buffer, and then sets the typematic rate/delay to the default values.
Scan codes
Three sets of scan codes are available. The keyboard normally selects code set 2 (AT
compatible). The other sets may be selected using select alternative scan codes
command (F0h).
The following diagram numbers the positions which are referred to in the following
scan code tables.
58
44
46
47
48
49
50
51
52
53
54
55
57
1
2
3
4
5
6
7
8
9
10
11
12
13
15
91
96
101
92
97 102
93
98
103
108
104
99
64
41
40
39
38
37
36
35
34
33
32
31
30
16
17
18
19
20
21
22
23
24
25
26
27
28
43
61
90
95
100 105
62
60
106
75
85
80
76
86
81
83
79
89
84
120 121
123
122
124
126
125
110
112 113
115
114
116 117
119
118
42
45
Содержание Apricot LS Pro
