M o t h e r b o a r d : f e a t u r e s & u p g r a d e s
5/14 FT1200 HANDBOOK
5. The computer starts the Setup program. Setup displays
the Maintenance menu.
6. Use the arrow keys to select the Processor Speed feature
and press <Enter>. Setup displays a popup screen with
the available processor speeds.
7. Use the arrow keys to select the processor speed.
◊
For example, select 266 for a 266
MHz
Pentium®II processor. Press <Enter> to confirm
the speed. The Maintenance menu reappears.
8. Press <F10> to save the current values and exit Setup.
9. Turn off the computer.
10. Remove the computer cover.
11. On the jumper block (J7E1), move the jumper back to
pins 1-2 to restore normal operation as shown below.
J7E1
1
3
12. Replace the cover and turn on the computer.
How to Install Memory
You can install from 16 MB to 512 MB of SDRAM in the
motherboard DIMM sockets. Memory can be installed in
one, two, three, or four sockets. DIMM size can vary
between sockets.
The motherboard supports 66-MHz unbuffered (72bit)
ECC SDRAM based on 168-pin 3.3 V DIMMs with gold-
plated contacts.
Single or double-sided DIMMs can be used as follows:
DIMM Size
Configuration
16 MB
2 Mbit x 72
32 MB
4 Mbit x 72
64 MB
8 Mbit x 72
128 MB
16 Mbit x 72
