S A F E T Y & R E G U L A T O R Y N O T I C E S
FT1200 HANDBOOK v
Power Connection
Typical AC plugs
250V
E
L
N
E
N
L
250V
E
N
L
125V
250V
N
L
E
250V
BS1363A
SHUCO
NEMA 5-15P
SRAF 1962/DB16/87
ASE 1011
U. K.
Austria Belgium
Taiwan
Denmark
Switzerland
Finland France
Thailand
Italy Germany
Japan
Sweden Norway
USA
Holland
Canada
Checking the AC power supply
When this product is delivered, it is ready for the commercial AC power
supply generally available in the country in which it is first sold. It has been
set for the correct voltage range, and is supplied with an AC power cord and
plug which comply with the relevant safety standards.
Before using the product in a country other than that in which it was
originally sold, you must check the voltage and frequency of that country’s
AC power supply, and the type of power cord required there. Check the
power rating labels on the rear of the computer’s system unit and its
monitor to ensure that they are compatible with the AC power supply.
The computer can function within two alternative AC power supply ranges,
according to the position of the voltage selection switch on the rear of the
system unit:
Switch setting
AC power supply (voltage and frequency)
115
100 - 120 volt AC, 50 - 60 Hz
230
200 - 240 volt AC, 50 - 60 Hz
The voltage setting of the monitor must always be the same as the voltage
setting of the system unit. See the
User’s Guide
that accompanies the monitor
or consult your supplier to find out how to change the voltage setting.
CAUTION
It is imperative that the computer is set to the correct voltage range before use.
If not, the machine may be irreparably damaged.
