Mitsubishi Electric AJ65VBTCU-68DAVN, Руководство пользователя

Страница: 39 / 112

3 - 17 3 - 17
MELSEC-A
3 SPECIFICATION
3.6.4 CH. output range setting (Address RWwm+9
H
, RWwm+A
H
)
(1) Set the analog output range per channel.
(2) Operation is performed according to the setting made for the leading edges of
initial data setting request flag (RY(n+9)).
(3) The default settings are -10 to 10V for all channels.
b15 b12 b11 b8 b7 b4 b3 b0 to
CH.4
to
CH.3
to
CH.2
to
CH.1 RWwm+9
b15 b12 b11 b8 b7 b4 b3 b0 to
CH.8
to
CH.7
to
CH.6
to
CH.5 RWwm+A
Output range Seting value
-10 to 10V 0
H
0 to 5V 1
H
1 to 5V 2
H
User range setting 1 (-10 to 10V) 3
H
User range setting 2 (0 to 5V) 4
H
POINT
If the set value is outside the setting range, error "20 " occurs, the "RUN" LED
flickers at intervals of 0.1s, and all channels do not make D/A conversion.
indicates the channel No. where the error occurred.
3.6.5 HOLD/CLEAR setting (Address RWwm+B
H
)
(1) Set HOLD/CLEAR to each channel.
(2) Operation is performed according to the setting made for the leading edges of
initial data setting request flag (RY(n+9)).
(3) The default settings are CLERA for all channels.
b15 b14 b13 b12 b11 b10 b9 b8 b7 b6 b5 b4 b3 b2 b1
CH.2 CH.1
b0
Ignored
0: CLEAR
1: HOLD
CH.4 CH.3 CH.6 CH.5 CH.8 CH.7