21
z
Be sure that the communication cable connected to the module is kept in the
duct or is fixed with cramps.
Failure to do so may cause a damage to the module or cables due to
dangling, shifting or inadvertent handling of cable, or malfunction because of
bad cable contacts.
z
Do not grab on the cable when removing the communication cable connected
to the module.
When removing the cable with a connector, hold the connector on the side
that is connected to the module.
z
Do not install the control lines together with the communication cables, or
bring them close to each other.
Failure to do so may cause malfunctions due to noise.
z
Do not disassemble or modify the modules.
Doing so could cause failure, erroneous operation, injury, or fire.
z
Before cleaning, retightening the terminal block or module fixing screws, or
installing/removing a module, be sure to shut off all phases of the external
power supply used in the system.
Not doing so can cause the module to fail or malfunction.
z
Do not install/remove the terminal block more than 50 times after the first use
of the product. (IEC 61131-2 compliant)
z
Before handling the module, make sure to touch a grounded metal object to
discharge the static electricity from the human body.
Failure to do say cause a failure or malfunctions of the module.
z
When disposing of this product, treat it as industrial waste.
CAUTION
