Mitsubishi Electric AJ65BT-RPI-10A, Руководство пользователя

Страница: 5 / 54

A-4
[Startup and Maintenance Precautions]
[Disposal Precautions]
WARNING
●
Do not touch terminals when the power is on.
It may cause an electric shock or malfunction.
CAUTION
●
For use in any environment where optical axis misalignment or the like is
expected due to lens surface contamination, vibration, impact or the like,
carry out periodic maintenance/inspection and improve the environment.
Not doing so can cause a malfunction.
●
Never try to disassemble or modify module.
It may cause trouble, malfunction, injury or fire.
●
The module case is made of resin; do not drop it or subject it to strong shock.
Module damage may result.
●
Be sure to shut off all phases of the external power supply used by the
system before cleaning or retightening the terminal screws.
Not doing so can cause the module to fail or malfunction.
● Be sure to shut off all phases of the external power supply used by the
system before mounting or dismounting the module to or from the panel.
Not doing so can cause the module to fail or malfunction.
●
Do not install/remove the terminal block more then 50 times after the first use
of the product. (IEC 61131-2 compliant)
●
Always make sure to touch the grounded metal to discharge the electricity
charged in the body, etc., before touching the module.
Failure to do so may cause a failure or malfunctions of the module.
CAUTION
●
When disposing of this product, treat it as industrial waste.