13
(2) Stripping the cable end
Use an appropriate tool to crimp the bar terminal. (Refer to (1) in this
section)
For details of the crimping method, refer to the manuals of the bar terminal
or crimping tool used.
In the example, a crimping tool "FA-VTC125T9" manufactured by
Mitsubishi Electric Corporation is used.
1) Strip the cable jacket by 5.5mm to 6.5mm.
2) Place the terminal in the correct place (in the end) of the locater.
3) Insert the terminal until it reaches to the locater.
4) Insert the stripped cable into the terminal and crimp it.
