MITSUBISHI ELECTRIC ENGINEERING TSD-AT1521-MN, Руководство пользователя

Страница: 44 / 48

Addendum
20
Item Speci fi cations
LCD Diagonal 15 inch Thin fi lm transistor (TFT) color liquid crystal display (LCD)
Native resolution 1024 (H) x 768 (V) [One pixel = R+G+B]
Dot pitch 0.297mm
Aspect ratio 4:3
Pixel array R+G+B vertical stripe
Viewable angles Left/Right: 85°/85° Up/Down : 85°/85° , CR
≧
10
Contrast ratio 1500:1
Backlight method LED
Touch-sensor and
controller Method Analog resistance fi lm
Processing Non-glare
Resolution 0.40mm
Output RS232C/USB
Surface hardness 2H or harder
Input signal Video signal Analog 0.7Vp-p (Input impedance 75 Ω ), Digital RGB (TMDS)
Synchronization signal Separated, Multiple synchronization signal TTL compatible
Horizontal frequency 30.0kHz to 61.0kHz
Vertical frequency 55.0Hz to 75.4Hz
Display colors 16,190,000 at max. (8bit/color)
Active display area 304.1(H)×228.1(V)mm
Luminance Brightness 100% setting : 320cd/m
2
and more (standards)
Signal connector Video Signal Mini D-sub 15 pins (female) / DVI-D (female)
Touch Signal D-sub 9 pins (male) / USB Type-B
Plug & Play VESA DDC2B
Environmental
consideration* Input Connector 0 °C to 40 °C
Humidity 10% to 80%RH (Non condensing)
Power Supply DC12V / 2.5A (Power supply speci fi cation)
Power Consumption 16W (Standards)
Regulation Compliance VCCI B,UL, c-UL
Cabinet Outline Dimensions 376(W) x 291(H) x 49(D)mm
Bezel material Plastics
Bezel color Black
Weight Approx. 3.0kg
User control Touch OSD function
Switch and button None
OSD Brightness Luminance
Contrast Contrast
Display Vertical adjustment, Horizontal adjustment, Sharpness
Color Mode Color temperature (Cool, Neutral, Warm, User)
Clock/Phase Horizontal display size, Clock phase
Management OSD display position (Horizontal/Vertical), OSD display time,
Switching inputs, Reset
Accessories Power supply cord
,
Safety note, Signal cable (VGA
),
Touch communication cable, Customer service guide
• In case that your equipment is used with an enclosure such as console, your consideration should be given for ventilation in order
to satisfy the environmental speci fi cation on using it*. Especially, if the equipment is subject to be slanted 15° or more, compulsory
ventilating means such as fans should be used in order to prevent overheating in the enclosure.
Periodical maintenance is recommended to maintain performance when the annual operating time is long or the operating ambient
temperature is high.
Periodic maintenance is paid in principle. Please contact a member of our sales staff.
* The environmental speci
fi cation here means the surrounding environment of the monitor when you use it by following instructions
in this manual. (We do not mean the environment for console).
• The recommended power supply set (AC adaptor and power supply cord) is optionally available.
[Glossary]
Viewing angle: an angle viewed from which (when viewed obliquely) the speci fi ed contrast ratio is satis fi ed.
Speci fi cations
9. Addendum