MITSUBISHI ELECTRIC ENGINEERING TSD-AT1521-MN, Руководство пользователя

Страница: 32 / 48

Connection &
Adjustments
8
D-Sub
9 pin
USB
type B
Mini-D-Sub
15 pin
DVI-D
RS-232C
DVI output
VGA output
3
2
4
5
1
USB
1: DC power supply cable or recommended AC adapter
2: Video signal cable (mini-D-Sub 15pin)
3: Video signal cable (DVI-D)
4: Touch communication cable (USB type B)
5: Touch communication cable (D-Sub 9pin)
Touch communication cable is
connected to only 4 or 5.
RS-232C
USB
VGA input
DVI
DC Input
Serial Port
Computer
USB Port
Clamper
Video signal cable is connected
to only 2 or 3.
The connector between Touch communication connector (USB type B) and Video signal input connector (DVI-24pin) cannot be used.
Before connecting the signal cable, please turn off the power to this device, your computer and peripheral devices.
It is recommended to connect directly with the computer without the USB hub, etc. when connecting USB.
Connecting the Cables
Fix the Cable
Power supply cable
Clamper
USB Cable
Clamper
Core
Fix the cable so that the
core is located on the left
side of the clamper.
• Clamp the cable so that the USB cable must not come off easily, and the connector must fi x to the clamper.
• Clamp the cord so that the input plug must not come off easily, and the ferrite core must fi x to the clamper as fi gured
above.
• Before clamping the cord, be sure to read instructions for power supply set carefully. Clamp the cord so that the cable
of AC adapter must not come off easily.
Fix the cables surely with each fi xed screws.