background image

LS700BS 7 Ton Petrol Logsplitter

3

Original Instructions Version April 13

DON’T OVERREACH

Keep a proper footing and balance at all times. Never stand on the log splitter. Serious injury 
could occur if the tool is tipped or if the cutting tool is unintentionally contacted. Do not store 
anything above or near the log splitter where anyone might stand on the tool to reach it.

AVOID INJURY FROM UNEXPECTED ACCIDENT

Do not straddle or reach across the splitting area when operating the log splitter. Never pile 
logs to be split in a manner that will cause you to reach across the log splitter. Only use your 
hands to operate the control levers. Never use your foot, knee, a rope, or any other extension 
device. Always pay full attention to the movement of the wedge ram. Never attempt to load 
your log splitter while the ram is in motion. Keep hands out of the way of all moving parts. 
Never try to split two logs. One of them may fly up and hit you.

PROTECT YOUR HANDS

When the ram of the log splitter is in the return mode, keep your hands off the machine – the 
log splitter is designed to automatically stop when the cylinder is fully retracted. Keep your 
hands away from splits and cracks which open in the log. They may close suddenly and crush 
or injure your hands. Do not remove jammed logs with your hands.

INCORRECT USE

The log splitter will do a better and safer job working at its designed rate. Don’t use the log 
splitter for a purpose for which it was not intended. Do not, under any circumstances, alter 
your log splitter. This equipment was designed and engineered to be used in accordance with 
the operating instructions. Altering the equipment, or using the equipment in such a way as 
to circumvent its design capabilities and capacities, could result in serious or fatal injury and 
will void the warranty. Never try to split logs larger than those indicated in the specifications 
table. This could be dangerous and may damage the machine.

NEVER LEAVE THE LOG SPLITTER RUNNING UNATTENDED

Don’t leave the tool until it has come to a complete stop.

FOR YOUR SAFETY

  

Do not remove or tamper with any of the machines protection or safety devices or modify 
the log splitter in any way.

PROTECT THE ENVIRONMENT

Take used oil to an authorized collection point or follow the stipulations in the country where 
the log splitter is used. Do not discharge into drains, soil or water.

MAINTAIN YOUR LOG SPLITTER WITH CARE

Always clean the unit after each use. Keep the log splitter clean for best and safest performance. 
Follow the instructions for lubricating. Inspect all hydraulic seals, hoses and couplers for leaks 
prior to use. Control levers and power switch must be kept clean, dry and free from oil and 
grease at all times.

MAKE THE WORKSHOP CHILDPROOF

Lock the shop. Store the log splitter away from children and others not qualified to use it.

Содержание LS700BS

















Отзывы: