Mitox CS260TX, Руководство оператора

Страница: 13 / 40

CS260TX PREMIUM Chainsaw
13
Original Instructions Version November 16
CS260TX_141116
When storing the Chainsaw for a period of more than one month, empty the fuel tank and
run the engine to empty the carburettor of fuel.
Two-stroke fuel can cause deterioration of rubber and/or plastic components during prolonged
storage.
It is important to only use good quality, fresh fuel.
Fuelling
Shake the fuel container to thoroughly mix the two-stroke oil and petrol.
Clean dirt from around the fuel cap before removing.
Pour two-stroke fuel into the fuel tank with a filtered funnel, up to 80% of the fuel tank’s capacity.
Replace the fuel cap and tighten securely. Spilled fuel must be wiped away from the Chainsaw
before starting the engine.
Move at least 5m away from the refuelling area before restarting the engine.
When refilling the tank, always turn off the engine and allow it to cool down. Take a careful look
around to make sure that there are no sparks or open flames anywhere nearby before refuelling.
Chain Oil
Use only specialist anti fling chain oil. Fill the chain oil tank every time you fill the fuel tank.
Do not use waste or regenerated oil that can cause damage to the oil pump.
NOTE