manualshive.com logo in svg

Mitox CS260TX, Руководство оператора

Поделиться
Скачать
Mitox CS260TX Скачать руководство пользователя страница 4

CS260TX PREMIUM Chainsaw

4

Original Instructions Version November 16

CS260TX_141116

Directive 2000-14/CE. Guaranteed noise levels

Danger: Risk of intoxication

Danger: Risk of fire or explosion

This Chainsaw is for trained tree service operators only 

Hot surface, risk of burn

Explanation of Symbols on the Machine

For safe operation and maintenance, symbols are carved in relief on the machine.

 

STOP

PULL

STOP

PULL

STOP

PULL

FUEL TANK 

2 stroke mix
Position: Fuel cap

CHAIN OIL TANK

Position: oil cap

STOP SWITCH

Setting the switch to the “O” position, the engine stops immediately.
Position: Front-right of the unit

Taking Care of Warning Labels

Always keep warning labels clean and free of scratches, which might make them illegible or     
difficult to read. If the warning labels provided with your Chainsaw become damaged, peel   
off, or otherwise become illegible or difficult to read, order new labels from the authorised  
servicing dealer and replace the damaged labels. When applying new labels, first wipe away any   
dirt and dry the surface before applying the new label in the same place as the original label. 

Содержание CS260TX









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды