mitko OCTA GO, Руководство пользователя

Страница: 5 / 40

5/40
ENGLISH
7. The Producer declares that the statical calculations for the Octa Optima II in sizes
3×3 m, 3×4,5 m, 3×6 m and Octa Pro in sizes 3×3 m, 3×4,5 m, 3×6 m, 4×4 m,
4×6 m, 4×8 m have been carried out according to the PN-EN 13782:2015-2007
– „Temporary objects – Tents – Safety” norm (original calculations available at
the Manufacturer). The tents may be used with wind up to 28 m/s (100 km/h)
provided it is protected against wind gusts as described in tables no. 1. During
stronger wind, it is recommended in all cases to disassemble the tent (first
remove the wall and then fold the roof). Mechanical damage resulting from
failure to follow the above recommendations are not covered by the warranty.
At wind speeds of 50 km/h < 100 km/h, the Octa Optima II in size 3×6 m and
Octa Pro in size 3×6, 4×8 m must be secured by placing, on middle legs, guy rope
at 1 m height and anchor it at an angle of 45 degrees.
Fig. 1. Octa Optima II 3×6 m and Octa Pro 3×6, 4×8 m tents lines mounting
8. Octa Optima II in sizes 3×3 m, 3×4,5 m, 3x6 m and Octa Pro in sizes
3×3 m, 3×4,5 m, 3x6 m, 4×4 m, 4×6 m, 4×8 m with unusual structures,
i.e. with height increased by max 0,5 m. Tent may be used with wind up to
14 m/s (50 km/h) provided it is protected against wind gusts as described in
table no. 2. During stronger wind, it is recommended in all cases to disassemble
the tent (first remove the wall and then fold the roof). Mechanical damage
resulting from failure to follow the above recommendations are not covered
by the warranty.