Miteq DNB1-11.2TR Скачать руководство пользователя

Страница: 26 / 74

Operation | 18

1/3 Rack Block Downconverters (Option 17)

DNB1-XTR, Rev.N, 8/14/2012

DATE/TIME SCREEN

Figure 3-15. Date/Time Screen Display

Date and Time

In order to adjust the date and time:

•

Press the up or down arrow key until the Date and Time screen is displayed.

•

Press the left or right arrow key to select each of the

elds: month, day, year, hour, minute, second.

•

If the selected

eld is correct then press the left or right arrow key to advance to the next

eld.

•

If the selected

eld needs adjustment use the up or down arrow keys to adjust the new display. (Note: Time

displayed in the 24 hour format)

•

Continue to press the left or right arrow key adjusting the necessary

elds until all of the

elds are correct.

•

Press “ENT” at any time to set the date and time to those displayed.

LCD CONTRAST/EXTERNAL FAULT SCREEN

Figure 3-16. LCD Contrast and External Fault Screen Display

LCD Contrast

In order to adjust the LCD contrast:

•

Use the up and down arrow keys to access the LCD Contrast/External Fault Screen.

•

Press the left or right arrow key to locate the cursor in the LCD Contrast

eld.

•

Use the up or down arrow keys to adjust the contrast of the display.

•

An Error tone will sound if the end of the adjustment range is reached.

Note

If the display is too light or too dark to read use the following sequence to quickly access contrast:

1.  Press the “STATUS” indicator button.
2.  Press the “ENT” button.
3.  Use the up arrow to darken the display or the down arrow to lighten the display.

Содержание DNB1-11.2TR











































































Результаты поиска

Содержание DNB1-11.2TR

Отзывы:

Похожие инструкции для DNB1-11.2TR

Бренды по названию

Популярные бренды

Miteq DNB1-11.2TR, Руководство пользователя

Результаты поиска

Содержание DNB1-11.2TR

Отзывы:

Похожие инструкции для DNB1-11.2TR

Бренды по названию

Популярные бренды