Mitel Single-Line Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 41

Mitel Single-Line Скачать руководство пользователя страница 24

Mitel

®

Single-Line Phone User Guide – Issue 13, September 2009

Page 13

Call Features

Forwarding Calls

You can use Manual Call Forwarding or System Forwarding to forward calls.

Manual Call Forwarding

You can use Manual Call Forwarding to send incoming calls to another extension or external
number. The following table describes Manual Call Forwarding options.

To use Manual Call Forwarding:

1.

Lift the handset, and then dial one of the feature codes from the table above.

2.

Dial the extension number, or select an outgoing line, and then dial the telephone
number.

To cancel a Call Forwarding request:

Do one of the following:

1.

Lift the handset, and then dial any of the call forwarding feature codes from the table
above.

2. Hang

up.

System Forwarding

System Forwarding allows your system administrator to route calls based on the type of call and
the idle or busy status of your phone. You cannot program the System Forward destination—
you can only turn it on or off. Contact your system administrator for more information.

To turn System Forwarding on or off:

Lift the handset, and then dial 354.

Call Forward Feature

Description

Code

Call Forward All Calls

All incoming calls are forwarded without
ringing at your phone.

355

Call Forward If No
Answer

All incoming calls are forwarded if not
answered. (The timer is set by the
system administrator.)

356

Call Forward If Busy

When your phone is busy, all incoming
calls are forwarded without ringing.

357

Call Forward If No
Answer/Busy

All incoming calls are forwarded if your
phone is busy or if you do not answer.

358

«
...
22
23
24
25
26
...
»

Содержание Single-Line










































Отзывы:

Нет отзывов