Mitel MiVOICE 6930 Скачать руководство пользователя страница 69

Страница: 69 / 211

Mitel 6930 SIP Phone User Guide

lxx

Configuring the Audio Mode Using the IP Phone UI

Press

on the phone to enter the Options List.

Navigate to the

Audio > Audio Mode

option and press the select button or

Select

softkey.

Use the up and down navigation keys to scroll through and highlight the desired audio mode.
Valid values are:

•

Speaker (default)

•

Headset

•

Speaker/Headset

•

Headset/Speaker

Press the

Save

softkey to save your changes.

Headset

The

Headset

option allows you to set the volume level for the headset microphone and also allows

you to enable/disable DHSG.

Configuring Headset Mic Volume and DHSG Using the IP Phone UI

Press

on the phone to enter the Options List.

Headset/Speaker

Incoming calls are sent to the headset first when the

button is pressed.

By pressing the button again, you can switch back and forth between the
headset and the handsfree speakerphone. At anytime, lifting the handset
switches back to the handset from either the headset or the handsfree
speakerphone.

Audio Mode Option

Description

Содержание MiVOICE 6930




















































































































































































































Результаты поиска

Содержание MiVOICE 6930

Отзывы:

Бренды по названию

Популярные бренды

Mitel MiVOICE 6930, Руководство пользователя

Результаты поиска

Содержание MiVOICE 6930

Отзывы:

Бренды по названию

Популярные бренды