Personalizing your phone
MiVoice 5380 / MiVoice 5380 IP
101
eud-1679/1.0 – R3.0 – 08.2015
To answer a call you can choose between answering directly by pressing the Line key,
picking up the handset, and using automatic hands-free operation.
Answering an external call using automatic hands-free operation is not available.
The following audio settings are possible:
Ring
,
Melody
,
Speed
,
Answer
.
Notes:
• A Line key can only be allocated to a configurable key.
• To find out how to use a line key, refer to the Chapter "Making calls using the Line key",
page
111
.
<long>
Press the Line key you want and hold it down for a moment.
➔
The display shows the Line key and the properties with which you can
configure the Line key.
Note:
The Personal key is also treated as a line key.
Line key
Scroll to
Line key
and press the
Select
Foxkey.
<Audio setting>
Set the Audio settings:
Scroll to the required audio settings and press the
Modify
Foxkey. Select
the required setting and confirm with the
Ok
Foxkey.
➔
The setting is stored.
Setting possibilities for ringing:
•
Off
for no ringing tone,
On
for instant ringing tone
After10s
,
After20s
and ringing tone
After30s
and confirm with
Ok
Foxkey.
• You can listen to each setting using the
Test
Foxkey.
Answer
Setting the answering mode:
Scroll to
Answer
and press the
Modify
Foxkey.
Select the required setting and confirm with the
Ok
Foxkey.
➔
The setting is stored.
Setting possibilities for answering:
Key
to answer the call by pressing the line key,
Handset
to answer by
picking up the handset, and
Hands-free
to answer automatically with
hands-free.
Notes:
• The
Handset
and
Hands-free
settings only work when the ringing sig-
nal is activated.
• If you select answer using
Handset
or
Hands-free
, you must also spec-
ify the
Priority
, with 1 being the highest priority, and 8 the lowest.
