Filter function
57
To programm the supervision function
(filtering phone case):
10 - Press the
key to return to the selection of a new key.
-> This key will permit to activate of deactivate the supervision.
11 - Select
Filtering
and confirm.
12 - Select
You are filtering
and confirm.
13 - Select
Supervision
and confirm.
14 - Enter the
number of the filtered phone
again.
15 - Press
OK
if the key is not programmed or
Modify
if the key is
already programmed.
16 - Next, select the audible alarm mode via which you want to be
notified (
Silence - Bips - Ring - Repeat bip
) and confirm with
OK
.
-> The step is confirmed by a message.
Caution !
You must proceed to the same programming
on the filtered set,
except:
6 - Select
You are filtered
.
-> The number to be entered will be the filtering.
12 - Select
You are filtered
.
-> The number to be entered will be the filtering.
c
Filtering
You are filtering
Supervision
☛
Bips
