Making a call
9
Note
:
• The microphone in hands-free mode must not be covered.
• The sound quality will be better if you adjust the volume of your
phone to a low level.
Switching to hands-free mode during an ongoing call via the handset
1 - Press the loudspeaker key.
-> Group listening is activated. The
symbol appears in the
upper part of the screen. The indicator in the top left-hand
part of the phone flashes.
2 - Hang up the handset before it switches off (timer of 10 to 15
seconds).
-> The hands-free mode is activated. The
symbol appears in
the upper part of the screen.
Note:
As soon as the indicator on the left-hand side goes out, the
handset is hung up and thus terminates the call.
To continue the call with the handset:
Pick up the handset.
-> The loudspeaker and the hands-free microphone are
deactivated.
Using the micro-headset mode
When a micro-headset is connected to your set, micro-headset mode replaces hands-free
mode
(refer to the section “Programming a micro-headset connection”, page 69 and
consult your system operator to have more information about facilities associated with the
micro-headset)
.
Answering a call in micro-headset mode:
You are using a headset with microphone. Terminal idle, the
symbol is displayed on screen.
When the phone rings,
• Press the loudspeaker key, the green key or the headset button
where available.
Note
: if
Auto connection
mode has been programmed,
communication is automatically initiated.
or
