Mitel 5560 IPT none, Руководство пользователя, Страница: 43 / 51

Mitel 5560 IPT User Guide
To request a Callback when you reach a busy or unanswered station:
1. Press Call Me Back .
2. Press the Release that corresponds to the side of the 5560 IPT you are using.
When the party is available, your 5560 IPT starts ringing, and the display shows the
Callback ringing indicator with the calling party's phone number.
To answer a Callback:

When the Callback notification appears (a Float key with calling party's name label),
press the Float key to call the calling party OR press the flashing line key.
Call Park
The Call Park feature allows you to place a call in a special hold state. You, or someone
else, can then retrieve the call from any extension in the system.
After parking the call, the system can automatically connect you to paging equipment so
that you can announce the call to the requested party.
To park an active call:
1. Press Left or Right to select the handset/headset you want to use.
2. Do one of the following:

Press the key you have programmed as Call Park .

Press Trans/Conf , and then dial the appropriate feature access code. The
display shows PARKED@, followed by the park destination and parking spot
index (if applicable). Example: PARKED@ 1234 @ 02.
3. Dial the directory number on which to park the call (not required if the number is
programmed to the Call Park feature key).
4. To inform a user that a parked call is waiting, do one of the following:

If automatic paging is enabled, announce the call and the park retrieve digits
shown on the display.

If automatic paging is disabled, press the key you have programmed as Page , or
dial the appropriate feature access code, followed by the Paging zone number (if
required). Then, announce the call and the park retrieve digits shown on the
display.
Note : Paging over a loudspeaker is not permitted in handsfree mode; you must use
the handset or headset.
37