SB203
ORIGINAL INSTRUCTIONS
2
Purpose and Scope
MiTek has applied software and wiring changes to the
RoofTracker III
to make daily
operation more efficient and convenient. These changes eliminate the need to press and
hold the Reset button to move the gantry head in the opposite directions when the safety
circuit detects an obstruction.
Please upgrade your software as soon as possible and return
the parts indicated to MiTek.
Once the software update is complete, machines with laser scanners will exhibit a faster
deceleration when the scanner detects an obstacle, resulting in a smoother stop and
reduced wear and tear on machine components.
IMPORTANT: Returning Parts
An RGA document is enclosed in your kit to return the two memory devices. Please
package them in a way that they will not be damaged during shipment. Thank you!
Overview
The parts included in the kits are shown below. Please make sure all parts are present
before starting this procedure.
Figure 1: Parts in SB203KITs
Contact MiTek Automation Solution Customer Service
immediately upon completing this procedure, and we will
arrange for Fedex to pickup the package.
[email protected] or 800-523-3380
Quantity
Kit Voltage Description
Part #
1
208V
Memory module programmed for VFD
509791-505
230V
509791-506
460V
509791-507
575V
509791-508
1
-
Memory cassette programmed for safety
controller
94019
4 ft
-
Wire, 18 AWG (for jumpers)
508003
16 ft
-
Wire, 16 AWG (for signal wires)
508870
1 sheet
-
Blank labels for new wires
694060
1
-
Service bulletin document
SB203
1
-
RGA document for returning memory
devices
N/A
1
-
Printed electrical schematic
90635 rev. H