MITECH MT200 Скачать руководство пользователя страница 16

Страница: 16 / 23

mvip@mitech-ndt.com

4.00

5.01

6.01

7.00

8.01

The

left

screen

displays the total five

record data in the file

F00.

4.11.3 Clearing selected files

Enter the

【

Memory Management

】

menu screen and highlight the

【

Delete by File

】

item. Then press the

key. This function provides the user with the ability to delete the selected

data files previously saved in memory.

4.11.4 Clearing all the files

Enter the

【

Memory Management

】

menu screen and highlight the

【

Delete All Data

】

item. Then press the

key. This operation will delete all the measurement data stored in the

memory after confirmation.

4.12 Data Printing

Before printing, please insert one connection plug of the print cable (Optional parts) into the

socket on the up-left of the main body, and insert the other plug into the communication socket of
the mini-printer.

4.12.1 Print Current File

Enter the

【

Print function

】

menu screen and highlight the

【

Print Current

】

menu item, then

press the

key.

This operation will send all the data in current file to the mini printer via RS232 port and print

them out.

4.12.2 Print Selected File

Enter the

【

Print function

】

menu screen and highlight the

【

Print Memory

】

menu item, then

press the

key. After specifying the start file name and the end file name, the gauge will send all

the data in the files specified to print out.

4.12.3 Print All Memory

Enter the

【

Print function

】

menu screen and highlight the

【

Print All Mem

】

menu item

，

then

press the

key.

This operation will send all the memory data to the mini printer and print them out.

4.13 System Set

From the main menu screen, press

on the

【

System Set

】

menu item and enter its submenu.

1. When

【

Auto Save

】

is set to <On>

，

could store the measured data automatically to current file

after measurement

2. When

【

Key Sound

】

is set to

【

】，

the buzzer would make a short hoot while press the key

each time.

3. When

【

Warn Sound

】

is set to

【

】

, if the measured value exceeds the tolerance limit, the

buzzer would make a long hoot.

4. LCD Brightness Set: Press

on the

【

System Set

】

【

LCD Brightness

】

menu item to enter

the LCD brightness set screen. On the screen, press

to enhance the brightness, or press

to weaken the brightness. Press

to confirm the modifying, or press

to cancel the

[email protected]

Содержание MT200
























Результаты поиска

Содержание MT200

Отзывы:

Похожие инструкции для MT200

Бренды по названию

Популярные бренды

MITECH MT200, Руководство пользователя

Результаты поиска

Содержание MT200

Отзывы:

Похожие инструкции для MT200

Бренды по названию

Популярные бренды