5
2.3 Display
2.4 Keypad Definitions
Sheet2-1
Start key
Used to start measuring.
Up arrow/Parameter key Press this key to enter the parameter item, press the set key
to exit.
Down arrow/Storage key Press this key to enter saving record interface.
Left arrow/Graphic key
Press this key to enter graphic item, showing curved, graphic,
bearing ratio curve and others.
Right arrow/Print key
Press this key to start Bluetooth printer for printing.
Set/Menu key
Press this key to enter setting, long press to enter main
menu.
Enter key
Press this key to show the location of the stylus, press again
to exit. In other interface, this key is used to confirm the
modify result or exit the present interface.
Notes
：
In other interface, the unified regulation for up, down, left, right four arrows function keys is as
follows: up and down arrows to switch for selecting item; left and right arrows to adjust and
setting specific figures and values.
3. Operation
3.1 Connecting Probe
To ensure the stylus down, the probe is plugged into the host connection socket and pushed lightly to the
end. When pulling out, first pull out the probe from the connection socket, then take it out slowly from the
driver. The entire operation should avoid damage to the probe.
Notes:
The probe stylus is a key part of the instrument. In the plugging in and pulling out process, we
should be careful not to touch the stylus to avoid damage
.
3.2 Power On/Off
The instrument switch located in the lower-left corner in panel showed as 2.1 instrument side back
figure.
