MITECH MR200 Скачать руководство пользователя страница 20

Страница: 20 / 23

[email protected]

8.3.6 Maximum Depth of Profile Valley Rv

Rv is the depth from the deepest profile valley line to mean line within sampling length.

8.3.7 Mean Spacing of Local Peaks of Profile RS

RS is the mean spacing of adjacent local peaks of the profile within sampling length.

8.3.8 Mean Spacing of Profile elements RSm

RSm is the mean spacing between profile peaks at the mean line within sampling length.

8.3.9 Ten Point Height of Irregularities RzJIS

The sum of the mean height of the five highest profile peaks and the mean depth of the five deepest

profile valley from mean within the sampling length.

8.3.10 Maximum Height of Profile RyJIS

The same to 8.3.3 Rz

。

8.3.11 Skewness of The Profile RSk

RSk is the quotient of the mean cube value of the profile deviation (Yi) and the cube of Rq within

sampling length.

8.3.12 Average Height From Peak to Valley R3z

R3z is the mean of the sum of the third profile peak height and the third profile valley depth of each

sampling length over evaluation length.

Notes: Recommend 5 sample lengths to evaluate.

Содержание MR200
























Результаты поиска

Содержание MR200

Отзывы:

Бренды по названию

Популярные бренды

MITECH MR200, Руководство пользователя

Результаты поиска

Содержание MR200

Отзывы:

Бренды по названию

Популярные бренды