Garden/Tower-MICRO Use and installation manual Page 6 of 20
General installation instructions
1. After installing the column, make sure that it is perfectly closed with the watertight
covers supplied.
2. Make sure that the path between the sensors is free and that there are no obstacles
that could affect the communication between the optical assemblies of the transmitters
and receivers that could interfere with the beams (i.e. branches, plants, leaves,
snow,
etc).
3. Verify that the optical path of the transmitter used by the receiver column is not exposed
to direct sunlight at dawn and sunset.
4. If possible, do not use switching power supplies that cause disturbance to power
supplies when amplified by optically synchronized systems.
Mounting options
Columns may be mounted in two ways:
1. with a specific wall mounting base
2. with a specific ground mounting base.
Which in turn may be fixed in two ways:
•
with clamps, fixing the base to a plinth
•
with fixing gussets
Wall mounting
Wall mounting
Wall mounting
Wall mounting
Drill 4 holes of Ø 8 mm in the wall, level with the
base fixing holes.
Insert TE M8 steel gussets (not supplied) and fix
the base
200
210
Ø33
