Mistral MIR068, Инструкция по эксплуатации

Страница: 7 / 12

7
Dry ironing:
• To iron without steam, leaving the steam dial
on position“0”.
• Read the washing label instructions on your
clothes to select the required temperature.
• Begin ironing when the power indicator light
turns off.
Anti Drip:
With a bimetal assembled inside the iron,which
can close the steam when the iron soleplate
temperature becomes very low,so water
leakage will never happen with this features.
Auto Shut-Off:
An electronic safety device will automtically
switch the heating element off if the iron has
not been moved more than 30 seconds in a
horizontal position. If in a vertical position, this
will happen after 8 minutes. To indicate that the
heating element has been switched off, the
auto-off pilot light will start blinking.
• When picking up the iron again, the auto-
off pilot light will stop blinking. The power
indicator light will turn on. This indicates that
the iron is heating up again.
• Wait for the power indicator light to turn off.
Then the iron is ready for use.
Refilling with Water
• Switch off and disconnect the iron from the
power socket.
• Press the steam dial to “0” position.
• Refill with water, being very mindful of the hot
soleplate if the iron has recently been used.
• Plug the iron into the power socket and wait
until the power indicator light has switched off
before setting the steam dial to the required
steam level.
NOTE: Always disconnect the iron from
the power outlet before filling with water.
Emptying the
Water Tank
• Press the steam dial to “0” position.
• Disconnect the iron from the power socket.
• Hold the iron upside down and gently shake
to remove remaining water.
NOTE: Take care not to scald yourself
during this process.
Storage
Disconnect the plug from the power outlet and
ensure that the iron has cooled and the water
tank is empty before storing in a vertical position.