Mistral MIR068, Инструкция по эксплуатации

Страница: 5 / 12

5
Your Steam Iron
Before using your new Steam Iron, it is important
that you read and follow the instructions in this
booklet, even if you feel that you are quite
familiar with this type of appliance. Find a place
to keep this booklet handy for future reference.
Your attention is drawn to the section dealing
with Important Safeguards.
This appliance has been designed to operate
from a standard domestic power socket. It is not
intended for industrial or commercial use.
Before First Use
When using the iron for the first time, test it on an
old piece of fabric to ensure that the soleplate
and water tank are completely clean. When
using the iron for the first time, you may notice a
slight emission of smoke and hear some sounds
made by the expanding plastics. This is quite
normal and it stops after a short time.
How to use your
Steam Iron
Filling the tank with water:
CAUTION! Before filling the tank with water, make
sure the appliance is unplugged.
• This iron can be used with normal tap water.
• Use the water measuring cup to fill the tank.
Never fill directly from the tap.
• If the water in your area is particularly
hard, it is recommended to use distilled or
demineralised water.
• Do not put vinegar, starch, chemicals,
de-scaled water or de-scaling agents in the
water tank.
• Remove the mains plug from the wall socket
before flling (or emptying) the iron with water.
NOTE: Wait for the iron to cool down
before emptying or filling the water tank.
• Press the steam dial to [0] position, and
the temperature control dial to the ‘OFF’
position.
• Open the filler cap of water inlet.
• Place the iron on the heel rest and tilt forward
at a 45° angle to help the water enter the
opening without over flowing.
• Pour water into the water tank opening
and fill up to the maximum (MAX.) level and
taking care not to go over the maximum level
(about 320ml) indicated by “MAX” on the
water tank.
• Close the filler cap of water inlet.
Setting the temperature:
• Stand the iron on its end.
• Set the variable temperature control dial to
the desired temperature setting.
• Insert the plug in the wall socket and stand
the iron upright.
• When the desired temperature is reached the
power indicator light will turn off,and you can
begin ironing.
NOTE: While ironing, the power indicator
light will turn on and off to maintain your
desired temperature setting.
• If you set the temperature control to a lower
setting after ironing at a high temperature,
please allow time for the iron to cool. This is to
prevent scorching your garment.