• Remove factory cap and seal from
pour port.
• Thread bottle cap onto pour port,
ensuring it is not cross-threaded or
too tight.
a.
Secure Cap on
Bottle
• Remove seal on vent port so that
bottle does not collapse as
insecticide is pumped out.
• Insert bottle into coupler (Pressing
button on coupler will free bottle for
removal.)
• EMPCAR (empty cartridge)
continues to appear in display.
b. Vent Opposite
Port and Insert
Bottle into
Coupler
7.
Install Insecticide and Program Dose Settings
• MAINTENANCE Menu, scroll to
REFILL
• Depress Green
►
button 5 seconds
to enter routine.
c.
Set Dose
Settings
Section 3
Setting Up the Unit
• DAY/TIME Menu.
• Set to ON if daylight savings in
effect, OFF if not.
• Press Green
►
to advance.
a.
Set Daylight
Savings Time
switch
• Set Day and Time. (note AM and PM)
• Exit by pressing Menu button.
b. Set Day and
Time
8.
Program System Setup
• SET-UP Menu, REM.
• Set duration in seconds.
c.
Set REMOTE
MIST Duration
• Set dip switches in remote
transmitter. (see Section 4, Using the
Remote)
• SET-UP Menu, LRN.
• Depress Green
►
button 5 secs,
until LRN On and countdown starts.
• Depress Remote Transmitter button
until DONE is displayed.
d. Orient Remote
Transmitter
Section 3
Setting Up the Unit
to enter routine.
• Set MIX ratio (parts water to 1 part
concentrate) to target. Default is
108:1 See Section 5, Managing
Insecticide for guidance
• Push Green
►
button to advance
• Set bottle size (BOT) in ounces.
Default is 64 oz. Range is 2 to 256
oz.
• Push Green
►
button to advance
• Set LEVEL in the bottle. Eight bars
indicates a full bottle of the size
entered in previous step. Four bars
indicates bottle is ½ full.
• Push Green
►
button
• DONE will be displayed.
• VENT will be displayed. Confirm
VENT by pushing Green
►
button.
• SET-UP Menu, MAN.
• Set duration in seconds.
e.
Set MANUAL
MIST Duration
• SET-UP Menu, SEN.
• If sensor installed, ON. Otherwise
OFF.
h. Establish
optional Wind
Sensor
• SET-UP Menu, NOZ.
• If zone valve installed, repeat for NZ2.
f.
Set # of nozzles
• SET-UP Menu, WND.
• Set max wind speed.
i.
Set Max Wind
Speed (wind
sensor required)
• SET-UP Menu, AGT.
• Set duration of agitation that occurs
prior to each AUTO mist. Default is
15 seconds.
• Set time of once-daily agitation.
Default is 3:00 pm.
• SET-UP Menu, RAG.
• Set duration of agitation that occurs
prior to each REMOTE mist.
g. Set Agitation
Parameters
