• On firm level surface.
• Free from flooding or sprinklers.
• Near GFCI outlet and faucet.
1.
Position Gen III+ Unit
• Confirm faucet is able to deliver at
least 1 gal/min..
• Be careful not to introduce dirt or
other contaminants into line.
• Insert 3/8” tubing/filter assembly into
3/8” bulkhead fitting located at the
back right corner of unit.
• Thread adapter onto faucet (or
optional hose bib “Y”).
• Measure and cut 3/8” nylon tubing
• Run water to flush line before
connecting to filter inlet.
2.
Install Water Supply
Line
3.
Connect Nozzle
Circuit
• To ¼” bulkhead fitting at back right
corner of unit.
• If zone kit, install according to
instructions provided.
Section 3
Setting Up the Unit
• SET-UP Menu, ALT.
• If sensor installed, set
time (in seconds) that
alarm will sound prior to
each scheduled and
remote mist.
j.
Establish
optional
External Alarm
• CYCLES Menu.
• 2 – 3 scheduled mists of 30 – 60
seconds in duration is common.
• See Section 5, Managing Insecticide
for field standard frequency, duration
and mist times.
• Blinking C# identifies each
automatic mist cycle with current
mist duration and mist time. Limit is
24 cycles per day.
• Set mist duration and time (note
a.
Set AUTO
MIST Cycles
9.
Set Misting Schedule
Section 3
Setting Up the Unit
• GFCI Outlet.
• 115 volts minimum. Confirm voltage
with multi-meter.
• 15 amp circuit required. Unit draws
9 amps when misting. Ensure total
load of unit plus all other devices on
circuit does not exceed breaker
rating.
5.
Connect Electric
Power
instructions provided.
4.
Connect Remote
Antenna
• Thread onto coax fitting on top of
unit.
• MAINTENANCE Menu, scroll to INS.
• Depress Green
►
button 5 seconds
• Unit will fill and mist for 5 minutes or
until stopped.
• Confirm pump pressure (240 psi)
and insert plastic plug into pump
adjustment port.
• Confirm no leaks in nozzle circuit
• If zone valve installed, repeat for
INS2.
6.
Run Inspection
Cycle
• Set mist duration and time (note
AM/PM) for each desired scheduled
mist.
• MAINTENANCE Menu, scroll to
CHG.
• Depress Green
►
button 5 seconds.
• DOSE will flash for extended period
as batch tank of fresh water is
brought to target concentration.
10. Charge Insecticide
• If you don’t want to schedule mists
for every day.
• CUSTOM PGM Menu.
• Set selected days to ON or OFF.
• System Mode must be set to AUTO
Custom.
b. Set AUTO MIST
Days
