TROUBLESHOOTING
Water accumulates around the drain and the bathtub does not empty completely.
•
Check that the installation is level and that the bathtub sits firmly on its base.
Bottom of bathtub moves during use.
•
Bathtub is not sitting firmly on its base; shim if necessary.
Polyethylene film will not come off.
•
Use a hair dryer to heat the adhered surface.
MAINTENANCE
Regular disinfections provide an effective defense against types of bacteria susceptible of developing over time. For
general maintenance cleaning, use a moist cloth and gentle liquid detergent. For acrylic surfaces, occasional use
of a special acrylic surface cleaner will add luster and protect the finish.
Do not
use abrasive cleaners, scrapers,
metal brushes, or any items or products that could scratch or dull the surface.
Paint stains:
Use either turpentine or
a paint thinner. Silicone: Use a plastic or wood spatula covered with a damp cloth only. If a rubber mat is used, it
must be removed immediately after each use. Ignoring this recommendation will cause damage not covered by the
warranty. Certain types of therapeutic products added to bath water, or applied non-diluted directly into the bathtub,
may damage the unit’s finish.
Test the product on a small inconspicuous surface prior to use.
6
CAP 06/17-A
