Miscea Remote Control, Инструкция по эксплуатации

Страница: 13 / 48

V 19.01
13
English
3. Use
3.3 Change dosage soap / liquid 1
Change the amount of soap/liquid 1 dispensed.
Press the «LIQUID 1» button. The green light of the «Soap/Liquid 1» segment will
light up. With the «+» and «-» buttons the amount of liquid 1 can be changed. To save
settings, press the «SAVE» button. All colored LED lights illuminate to indicate new
setting has been saved. If «SAVE» button is not pressed within 10 seconds of last
selection, previously saved setting will be stored.
There are 9 settings available. Each setting is indicated with a different beep tone. For
miscea models with a display, this will also be indicated visually on screen. Please see
Fig. C - E for technical data.
3.4 Change dosage disinfectant / liquid 2
Change the amount of disinfectant/liquid 2 dispensed.
Press the «LIQUID 2» button. The orange light of the «Disinfectant/Liquid 2» segment
will light up. With the «+» and «-» buttons the amount of liquid 2 can be changed. To
save settings, press the «SAVE» button. All colored LED lights illuminate to indicate
new setting has been saved. If «SAVE» button is not pressed within 10 seconds of last
selection, previously saved setting will be stored.
There are 9 settings available. Each setting is indicated with a different beep tone. For
miscea models with a display screen, this will also be indicated visually on screen.
Please see Fig. C - E for technical data.
3.5 Change initial water temperature
Compatible systems allow water temperature to be set at the preferred level in the
initial water temperature setting.
Press «TEMP» button. The «+» and «-» sectors on the faucet will light up red and blue
respectively. With the «+» and «-» buttons on the remote control, the initial starting
water temperature can be changed. To save settings, press the «SAVE» button. All
colored LED lights illuminate to indicate new setting has been saved. If «SAVE» button
is not pressed within 10 seconds of last selection, previously saved setting will be
stored.
There are 9 settings available. Each setting is indicated with a different beep tone. For
miscea models with a display screen, this will also be indicated visually on screen.
Please see Fig. C - E for technical data.
LIQUID 1
LIQUID 2
TEMP