5
84066
29 May 18
C
US
We want you to be completely satisfied with our products and service. If you have any comments or suggestions, please call
1-800-MIROLIN
toll free.
The company reserves the right to change models and specifications without notice.
60 Shorncliffe Rd., Toronto, Ontario M8Z 5K1
Telephone: (416) 231-9030 - Fax: (416) 231-0929
www.mirolin.com
Customer Service:
(416) 231-5790
Canada, U.S.A.: 1-800 -
MIROLIN
(647-6546)
Fax, Canada: 1- 800 - 463 - 2236
I
NSTALLATION CLEAN-UP
"
Remove construction dirt and residue with a mild liquid
detergent. DO NOT USE abrasive cleaners, scouring
compounds and pads, metal scrapers, steel wool, or
other materials that could damage or dull the surface of
the bath.
"
Remove plaster carefully with a blunt wooden block
having rounded edges.
"
Remove paint and other stubborn stains with isopropyl
(rubbing) alcohol.
"
DO NOT USE products such as acetone (nail polish
remover), dry cleaning solution, lacquer thinners,
gasoline, pine oil, etc.
FINISHING
"
Apply trim around the tub shower periphery to finish
drywall, if required.
"
Install the tub shower door according to the
manufacturer’s instructions if purchased.
Mirolin Industries Corp. is not responsible for any
damages incurred as a result of poor installation of the
product.
MAINTENANCE
The acrylic sheet, which forms the surface of your bathtub,
provides one of the most durable surfaces found in
modern bathrooms. Keep it bright and smooth with mild
liquid household detergent, soap and water, or foaming
cleansers. NEVER USE aromatic solvents, abrasive
cleaners, scouring compounds or pads, strong liquid
cleansers, or other material that could damage or dull the
surface of the bath.
Restoring Surface Gloss
- Restore surface gloss
by applying a very fine rubbing compound and polishing
the surface by hand or with a power buffer. Finish with an
application of a good quality automotive wax.
Minor Repairs to Surface
- Remove minor
scratches and scuffs as follows. First, wet sand the area
with 600 grit wet sandpaper until the surface is smooth.
Then, restore the gloss as described under
RESTORING
SURFACE GLOSS.
