MIRKA 412, Руководство пользователя, Страница: 6 / 124

6
english
Mirka 412 / 415 / 415 M
4.2 Switching on the
vacuum cleaner
4.2.1 Switch position “I”
1. Turn the switch to position
„I“.
The vacuum cleaner motor
starts.
4.2.2 Switch position „auto“ Before switching the switch to posi-
tion „auto“, ensure that the tool con-
nected to the appliance socket is
switched off.
1. Turn the switch to position
„auto“. The vacuum cleaner
motor starts when the con-
nected appliance is switched
on.
2. When the power tool is
switched off the vacuum clean-
er continues to run for a short
moment so that any dust in
the suction hose is conveyed
to the safety filter bag.
4.1.3 Connecting electrical
appliances
1. Ensure that the electrical
appliance is switched off.
2. Connect the electrical appli-
ance to the appliance socket
on the control panel.
To comply with regulations, only ap-
proved dust producing tools should
be connected.
The maximum power consumption
of the connected power tool is stat-
ed in section 9.4 “Technical data”.
Mirka 415 M: The hose diameter
and the setting for the suction hose
diameter must be the same.
Hose
ø
Hose diameter
setting
ø27 ø27
ø32 ø32
ø36 ø36
ø50 ø50
0
0
0
0
0
3
3
6
5
2
2
7
0
0
0
0
0
3
3
6
5
2
2
7
Mirka 415 M: The hose diameter
and the setting for the suction hose
diameter must be the same.
Hose
ø
Hose diameter
setting
ø27 ø27
ø32 ø32
ø36 ø36
ø50 ø50
4.2.3 Suction power control The motor speed and the suc-
tion power can be varied with
the suction power control. This
allows precise adaptation of the
suction power for different clean-
ing tasks.
0
0
0
0
0
3
3 6
5
2
2
7
4.3 Check volume flow
monitor (Mirka 415 M)
Before picking up dust with maxi-
mum room concentration values: 1. Check that all the filters are
present and properly fitted.
2. When the motor is running,
hold the suction hose shut.
An acoustic warning sounds
after approx. 1 second.